Home|Bookmark Site|Print|Tell a Friend|Contact Us |
Home > Shop > Speakers > Floorstanding Speakers > Vienna Acoustics Beethoven Concert Grand Symphony Edition

Vienna Acoustics Beethoven Concert Grand Symphony Edition


RRP: $ 9,999.00 AUD
$ 9,499.00 AUD
Options:
Finish *
Qty * Add to Cart
SKU: Beethoven Concert Grand SE
Reviews: Be the first to review

Scale, power and grandeur are all conferred by its name. As with all models in the Concert Grand range, the composer name is selected based on the scale, complexity and power of performance for which they are best known.

The term Concert Grand, like the piano of the same designation, refers to its ability to deliver this level of performance in large concert halls and music rooms. The new 3-way Concert Grand Symphony Edition delivers far more than just power and scale. The careful listener will delight in the lucidity and clarity of the all-important middle ranges where virtually all instruments find their tonic origins.

Here it excels, with a natural ease, clarity and quietness where only a few much more expensive designs have tread. For a large-scale screening room or theatre, the Concert Grand Symphony Edition delivers even the most demanding scenes with an ease that allows for deeper immersion into the film experience. A truly extraordinary product that will re-calibrate your expectations.

Beethoven Concert Grand Symphony Edition features our sophisticated neodymium tweeter, a descendant of our coax technology - a result of meticulous, permanent research and development.

Three 7" Spidercone bass drivers (or ULF, Ultra Low Frequency, drivers), feature a reworked motor assembly and revised placement of the XXP ribs, providing increased output, extension and control. The huge surface area that results from the use of three of these extraordinary drivers means effortless reproduction of extreme bass dynamics with articulation and force.

The veneers are as always, hand selected by us in Vienna. The true piano lacquers are only the highest quality available while adhering to the most stringent environmental standards of Western Europe.

The Tweeter
Over the years Vienna Acoustics had found the best sounding tweeter, a refined development in cooperation with the danish specialists from ScanSpeak. But the superior technology is the point source, and that tweeter was too big, so over the last 2 years, the goal was to develop a neodymium version which sounds the same as the reference or better. This was not only achieved but on the way, a super-tweeter extension was realised, with an outstanding resolution without compromising the smooth and natural overall characteristics of the original tweeter. Originally developed with neodymium magnets to decrease its size with zero compromises, it is unmatched in uncolored and neutral sound as the stand alone version as well.

The Bass Array
Three 7" Spidercone bass drivers (or ULF, Ultra Low Frequency, drivers), feature a reworked motor assembly and revised placement of the X3P ribs, providing increased output, extension and control. The huge surface area that results from the use of three of these extraordinary drivers means effortless reproduction of extreme bass dynamics with articulation and force.

The cabinet utilises several braces that divide the cabinet into two different chambers, one with a single woofer and the other with two woofers, each vented and uniquely tuned. The two lower units produce the lowest bass, working in parallel, while the single driver provides an ideal transition to the midrange driver. This configuration results in tremendous bass extension with speed and liquidity.

The Midrange Driver
The midrange driver of the Beethoven Concert Grand Symphony Edition features a cone with the Vienna Acoustics proprietary mixture "X3P" of TPX and 3 polypropylene based synthetics for maximum inner damping.

It combines the precision and transparency of hard cones - such as stamped metal - with the smoothness and musicality of sof­ter materials. One of the secrets is the right share of polypropylene which gives the optimum in stiffness and inner damping ratio. The inverted rubber surround provides the optimum of no-loss damping.

The Crossover Unit
Beethoven Concert Grand Symphony Edition demanded new development and design, using only the finest, selected components. The final sonic improvements as a result of these collective changes are greater clarity, speed as well as a greater bass extension without giving up any of the famed musical quality and rhythm inherent in all of Vienna's designs.

All of the individual crossover components are of the highest quality, chosen exclusively by listening tests. As a result, the designs feature very expensive handpicked capacitors, and metal-oxyd-film resistors with less than 1% tolerance are chosen for their freedom from inductance.

Even the tiniest variations in coil inductance may dramatically affect the width and depth reproduction in the soundstage. Vienna has eliminated this issue by winding their special air core inductors using a specially designed robot able to hold a tolerance of only 0.7%. The resulting improvement is decidedly worth the effort.

The massive, custom-made gold/silver plated binding posts are designed to assure lowest transition resistance and accept banana plugs, spade terminals or bare wire connection.

The Base Assembly
The new Beethoven Concert Grand Symphony Edition features a brand new base-foundation. The carefully manufactured device is created by using a high-pressure aluminium die-casting and designed for greatest stability and optimised decoupling of the speaker.

The Fit and Finish
As with all the models of the Concert Grand Series speaker systems, Vienna has perfected a real-wood veneer process that is exclusive and unrivalled: the membrane press / handcrafting veneer wrapping technique.

Through years of experience working with real wood and real-wood veneer techniques, especially for curved baffles, Beethoven Concert Grand Symphony Edition is meticulously handcrafted to the highest standards of quality in Vienna, Austria, with each finished speaker matching the reference within 0.3 dB, to ensure the most effortless and natural performance from every speaker that leaves their factory.

Impedance: 4 Ohms
Frequency response: 28-22000 Hz
Sensitivity: 91 dB
Recommended Amplifier: 50-300 Watts
Drive Units: 7" Woofer (3) XPP "Spidercone", 6" Midrange X3P Cone, 1.1" Dome-Tweeter Hand-Coated VA Silk Dome
Bass System: Bass Reflex
Bass Function: Impulse Optimizing QB 3 (Quasi-Butterworth)
Crossover Function: 3-way, 6 dB and 12 dB Bessel
Weight: 32.6kg each
Dimensions (WxHxD): 292 x 1145.5 x 400mm (with base assembly)
Other items you may like

Hearing Impairment and Watching TV in Poor acoustic echoing rooms

Dec 11 2017
Problem#1: Poor dialogue intelligibility The sad fact is that todays televisions have very...

Should I convert my CD collection to stored music?

Nov 17 2017
After weighing up the pros and cons - I couldn't fault the idea. Recently when visiting a...

AUDIO SCEPTICISM - ON TEST

Nov 08 2017
LES DAVIS AUDIO 3D-2 Constrained Layer Dampers Would you believe that a few discs, 50mm in...

Subscribe to our mailing list

* indicates required

Click below to visit our associations